Project_PlatForm/000_通用版本/090_商业经营仪表盘/EShangApiDashboard/pdlp/solvers.proto

// Copyright 2010-2024 Google LLC
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
//     http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.

syntax = "proto2";

package operations_research.pdlp;

option java_package = "com.google.ortools.pdlp";
option java_multiple_files = true;
option csharp_namespace = "Google.OrTools.PDLP";

import "ortools/glop/parameters.proto";

enum OptimalityNorm {
  OPTIMALITY_NORM_UNSPECIFIED = 0;
  OPTIMALITY_NORM_L_INF = 1;  // The infinity norm.
  OPTIMALITY_NORM_L2 = 2;     // The Euclidean norm.

  // The infinity norm of component-wise relative errors offset by the ratio of
  // the absolute and relative error tolerances, i.e., the l_∞ norm of
  // [residual / (eps_ratio + |bound|)], where eps_ratio =
  // eps_optimal_{X}_residual_absolute / eps_optimal_{X}_residual_relative
  // where {X} is either primal or dual, and bound is the corresponding primal
  // or dual bound (that is, the violated constraint bound for primal residuals,
  // and the objective coefficient for dual residuals).
  // Using eps_ratio in this norm means that if the norm is <=
  // eps_optimal_{X}_residual_relative, then the residuals satisfy
  // residual <= eps_optimal_{X}_residual_absolute
  //           + eps_optimal_{X}_residual_relative * |bound|
  OPTIMALITY_NORM_L_INF_COMPONENTWISE = 3;
}

// A description of solver termination criteria. The criteria are defined in
// terms of the quantities recorded in IterationStats in solve_log.proto.

// Relevant readings on infeasibility certificates:
// (1) https://docs.mosek.com/modeling-cookbook/qcqo.html provides references
// explaining why the primal rays imply dual infeasibility and dual rays imply
// primal infeasibility.
// (2) The termination criteria for Mosek's linear programming optimizer
// https://docs.mosek.com/9.0/pythonfusion/solving-linear.html.
// (3) The termination criteria for OSQP is in section 3.3 of
// https://web.stanford.edu/~boyd/papers/pdf/osqp.pdf.
// (4) The termination criteria for SCS is in section 3.5 of
// https://arxiv.org/pdf/1312.3039.pdf.
message TerminationCriteria {
  // The norm that we are measuring the optimality criteria in.
  optional OptimalityNorm optimality_norm = 1 [default = OPTIMALITY_NORM_L2];

  // Define CombineBounds(l,u) as a function that takes two equal-length vectors
  // and returns a vector whose elements are max{|l_i|, |u_i|} where non-finite
  // values of l_i and u_i are replaced with zero.
  // For example, CombineBounds([-2, -Inf, 5], [1, 10, 5]) == [2, 10, 5].

  // Recalling the definitions from
  // https://developers.google.com/optimization/lp/pdlp_math, c is the linear
  // objective vector, l^c are the constraint lower bounds, and u^c are the
  // constraint upper bounds. Define b^c = CombineBounds(l^c, u^c). Also,
  // define violated_bound(l^c, u^c, i) to be the bound (l^c or u^c) which is
  // violated by the current x[i].

  // When using DetailedOptimalityCriteria the conditions to declare a solution
  // optimal are:
  // | primal_objective - dual_objective | <=
  //     eps_optimal_objective_gap_absolute +
  //     eps_optimal_objective_gap_relative *
  //         ( | primal_objective | + | dual_objective | )
  // If optimality_norm is OPTIMALITY_NORM_L_INF or OPTIMALITY_NORM_L2 (where
  // norm(x, p) is the l_∞ or l_2 norm):
  // norm(primal_residual, p) <=
  //     eps_optimal_primal_residual_absolute +
  //     eps_optimal_primal_residual_relative * norm(b^c, p)
  // norm(dual_residual, p) <=
  //     eps_optimal_dual_residual_absolute +
  //     eps_optimal_dual_residual_relative * norm(c, p)
  // Otherwise, if optimality_norm is OPTIMALITY_NORM_L_INF_COMPONENTWISE, then,
  // for all i:
  // primal_residual[i] <=
  //     eps_optimal_primal_residual_absolute +
  //     eps_optimal_primal_residual_relative * |violated_bound(l^c, u^c, i)|
  // dual_residual[i] <=
  //     eps_optimal_dual_residual_absolute +
  //     eps_optimal_dual_residual_relative * |c[i]|
  // It is possible to prove that a solution satisfying the above conditions
  // for L_INF and L_2 norms also satisfies SCS's optimality conditions (see
  // link above) with
  // ϵ_pri = ϵ_dual = ϵ_gap = eps_optimal_*_absolute = eps_optimal_*_relative.
  // (ϵ_pri, ϵ_dual, and ϵ_gap are SCS's parameters).
  // When using SimpleOptimalityCriteria all the eps_optimal_*_absolute have the
  // same value eps_optimal_absolute and all the eps_optimal_*_relative have the
  // same value eps_optimal_relative.

  message SimpleOptimalityCriteria {
    // Absolute tolerance on the primal residual, dual residual, and objective
    // gap.
    optional double eps_optimal_absolute = 1 [default = 1.0e-6];
    // Relative tolerance on the primal residual, dual residual, and objective
    // gap.
    optional double eps_optimal_relative = 2 [default = 1.0e-6];
  }

  message DetailedOptimalityCriteria {
    // Absolute tolerance on the primal residual.
    optional double eps_optimal_primal_residual_absolute = 1 [default = 1.0e-6];
    // Relative tolerance on the primal residual.
    optional double eps_optimal_primal_residual_relative = 2 [default = 1.0e-6];
    // Absolute tolerance on the dual residual.
    optional double eps_optimal_dual_residual_absolute = 3 [default = 1.0e-6];
    // Relative tolerance on the dual residual.
    optional double eps_optimal_dual_residual_relative = 4 [default = 1.0e-6];
    // Absolute tolerance on the objective gap.
    optional double eps_optimal_objective_gap_absolute = 5 [default = 1.0e-6];
    // Relative tolerance on the objective gap.
    optional double eps_optimal_objective_gap_relative = 6 [default = 1.0e-6];
  }

  // If none are set explicitly the deprecated eps_optimal_absolute and
  // eps_optimal_relative are used to construct a SimpleOptimalityCriteria.
  oneof optimality_criteria {
    SimpleOptimalityCriteria simple_optimality_criteria = 9;
    DetailedOptimalityCriteria detailed_optimality_criteria = 10;
  }

  // Absolute tolerance on primal residual, dual residual, and the objective
  // gap.
  // Deprecated, use simple_optimality_criteria instead.
  // TODO(b/241462829) delete this deprecated field.
  optional double eps_optimal_absolute = 2
      [deprecated = true, default = 1.0e-6];

  // Relative tolerance on primal residual, dual residual, and the objective
  // gap.
  // Deprecated, use simple_optimality_criteria instead.
  // TODO(b/241462829) delete this deprecated field.
  optional double eps_optimal_relative = 3
      [deprecated = true, default = 1.0e-6];

  // If the following two conditions hold we say that we have obtained an
  // approximate dual ray, which is an approximate certificate of primal
  // infeasibility.
  // (1) dual_ray_objective > 0,
  // (2) max_dual_ray_infeasibility / dual_ray_objective <=
  // eps_primal_infeasible.
  optional double eps_primal_infeasible = 4 [default = 1.0e-8];

  // If the following three conditions hold we say we have obtained an
  // approximate primal ray, which is an approximate certificate of dual
  // infeasibility.
  // (1) primal_ray_linear_objective < 0,
  // (2) max_primal_ray_infeasibility / (-primal_ray_linear_objective) <=
  // eps_dual_infeasible
  // (3) primal_ray_quadratic_norm / (-primal_ray_linear_objective) <=
  // eps_dual_infeasible.
  optional double eps_dual_infeasible = 5 [default = 1.0e-8];

  // If termination_reason = TERMINATION_REASON_TIME_LIMIT then the solver has
  // taken at least time_sec_limit time.
  optional double time_sec_limit = 6 [default = inf];

  // If termination_reason = TERMINATION_REASON_ITERATION_LIMIT then the solver
  // has taken at least iterations_limit iterations.
  optional int32 iteration_limit = 7 [default = 2147483647];

  // If termination_reason = TERMINATION_REASON_KKT_MATRIX_PASS_LIMIT then
  // cumulative_kkt_matrix_passes is at least kkt_pass_limit.
  optional double kkt_matrix_pass_limit = 8 [default = inf];
}

message AdaptiveLinesearchParams {
  // At the end of each iteration, regardless of whether the step was accepted
  // or not, the adaptive rule updates the step_size as the minimum of two
  // potential step sizes defined by the following two exponents.

  // The step size reduction exponent defines a step size given by
  // (1 - (total_steps_attempted + 1)^(-step_size_reduction_exponent)) *
  // step_size_limit where step_size_limit is the maximum allowed step size at
  // the current iteration. This should be between 0.1 and 1.
  optional double step_size_reduction_exponent = 1 [default = 0.3];

  // The step size growth exponent defines a step size given by (1 +
  // (total_steps_attempted + 1)^(-step_size_growth_exponent)) * step_size_.
  // This should be between 0.1 and 1.
  optional double step_size_growth_exponent = 2 [default = 0.6];
}

message MalitskyPockParams {
  // At every inner iteration the algorithm can decide to accept the step size
  // or to update it to step_size = step_size_downscaling_factor * step_size.
  // This parameter should lie between 0 and 1. The default is the value used in
  // Malitsky and Pock (2016).
  optional double step_size_downscaling_factor = 1 [default = 0.7];

  // Contraction factor used in the linesearch condition of Malitsky and Pock.
  // A step size is accepted if primal_weight * primal_stepsize *
  // norm(constraint_matrix' * (next_dual - current_dual)) is less
  // than linesearch_contraction_factor * norm(next_dual - current_dual).
  // The default is the value used in Malitsky and Pock (2016).
  optional double linesearch_contraction_factor = 2 [default = 0.99];

  // Malitsky and Pock linesearch rule permits an arbitrary choice of the first
  // step size guess within an interval [m, M]. This parameter determines where
  // in that interval to pick the step size. In particular, the next stepsize is
  // given by m + step_size_interpolation*(M - m). The default is the value used
  // in Malitsky and Pock (2016).
  optional double step_size_interpolation = 3 [default = 1];
}

// Parameters for PrimalDualHybridGradient() in primal_dual_hybrid_gradient.h.
// While the defaults are generally good, it is usually worthwhile to perform a
// parameter sweep to find good settings for a particular family of problems.
// The following parameters should be considered for tuning:
// - restart_strategy (jointly with major_iteration_frequency)
// - primal_weight_update_smoothing (jointly with initial_primal_weight)
// - presolve_options.use_glop
// - l_inf_ruiz_iterations
// - l2_norm_rescaling
// In addition, tune num_threads to speed up the solve.
message PrimalDualHybridGradientParams {
  enum RestartStrategy {
    RESTART_STRATEGY_UNSPECIFIED = 0;
    // No restarts are performed. The average solution is cleared every major
    // iteration, but the current solution is not changed.
    NO_RESTARTS = 1;
    // On every major iteration, the current solution is reset to the average
    // since the last major iteration.
    EVERY_MAJOR_ITERATION = 2;
    // A heuristic that adaptively decides on every major iteration whether to
    // restart (this is forced approximately on increasing powers-of-two
    // iterations), and if so to the current or to the average, based on
    // reduction in a potential function. The rule more or less follows the
    // description of the adaptive restart scheme in
    // https://arxiv.org/pdf/2106.04756.pdf.
    ADAPTIVE_HEURISTIC = 3;
    // A distance-based restarting scheme that restarts the algorithm whenever
    // an appropriate potential function is reduced sufficiently. This check
    // happens at every major iteration.
    // TODO(user): Cite paper for the restart strategy and definition of the
    // potential function, when available.
    ADAPTIVE_DISTANCE_BASED = 4;
  }

  enum LinesearchRule {
    LINESEARCH_RULE_UNSPECIFIED = 0;
    // Applies the heuristic rule presented in Section 3.1 of
    // https://arxiv.org/pdf/2106.04756.pdf (further generalized to QP). There
    // is not a proof of convergence for it. It is usually the fastest in
    // practice but sometimes behaves poorly.
    ADAPTIVE_LINESEARCH_RULE = 1;
    // Applies Malitsky & Pock linesearch rule. This guarantees an
    // ergodic O(1/N) convergence rate https://arxiv.org/pdf/1608.08883.pdf.
    // This is provably convergent but doesn't usually work as well in practice
    // as ADAPTIVE_LINESEARCH_RULE.
    MALITSKY_POCK_LINESEARCH_RULE = 2;
    // Uses a constant step size corresponding to an estimate of the maximum
    // singular value of the constraint matrix.
    CONSTANT_STEP_SIZE_RULE = 3;
  }

  optional TerminationCriteria termination_criteria = 1;

  // The number of threads to use. Must be positive.
  // Try various values of num_threads, up to the number of physical cores.
  // Performance may not be monotonically increasing with the number of threads
  // because of memory bandwidth limitations.
  optional int32 num_threads = 2 [default = 1];

  // For more efficient parallel computation, the matrices and vectors are
  // divided (virtually) into num_shards shards. Results are computed
  // independently for each shard and then combined. As a consequence, the order
  // of computation, and hence floating point roundoff, depends on the number of
  // shards so reproducible results require using the same value for num_shards.
  // However, for efficiency num_shards should a be at least num_threads, and
  // preferably at least 4*num_threads to allow better load balancing. If
  // num_shards is positive, the computation will use that many shards.
  // Otherwise a default that depends on num_threads will be used.
  optional int32 num_shards = 27 [default = 0];

  // If true, the iteration_stats field of the SolveLog output will be populated
  // at every iteration. Note that we only compute solution statistics at
  // termination checks. Setting this parameter to true may substantially
  // increase the size of the output.
  optional bool record_iteration_stats = 3;

  // The verbosity of logging.
  // 0: No informational logging. (Errors are logged.)
  // 1: Summary statistics only. No iteration-level details.
  // 2: A table of iteration-level statistics is logged.
  //    (See ToShortString() in primal_dual_hybrid_gradient.cc).
  // 3: A more detailed table of iteration-level statistics is logged.
  //    (See ToString() in primal_dual_hybrid_gradient.cc).
  // 4: For iteration-level details, prints the statistics of both the average
  //    (prefixed with A) and the current iterate (prefixed with C). Also prints
  //    internal algorithmic state and details.
  // Logging at levels 2-4 also includes messages from level 1.
  optional int32 verbosity_level = 26 [default = 0];

  // Time between iteration-level statistics logging (if `verbosity_level > 1`).
  // Since iteration-level statistics are only generated when performing
  // termination checks, logs will be generated from next termination check
  // after `log_interval_seconds` have elapsed. Should be >= 0.0. 0.0 (the
  // default) means log statistics at every termination check.
  optional double log_interval_seconds = 31 [default = 0.0];

  // The frequency at which extra work is performed to make major algorithmic
  // decisions, e.g., performing restarts and updating the primal weight. Major
  // iterations also trigger a termination check. For best performance using the
  // NO_RESTARTS or EVERY_MAJOR_ITERATION rule, one should perform a log-scale
  // grid search over this parameter, for example, over powers of two.
  // ADAPTIVE_HEURISTIC is mostly insensitive to this value.
  optional int32 major_iteration_frequency = 4 [default = 64];

  // The frequency (based on a counter reset every major iteration) to check for
  // termination (involves extra work) and log iteration stats. Termination
  // checks do not affect algorithmic progress unless termination is triggered.
  optional int32 termination_check_frequency = 5 [default = 64];

  // NO_RESTARTS and EVERY_MAJOR_ITERATION occasionally outperform the default.
  // If using a strategy other than ADAPTIVE_HEURISTIC, you must also tune
  // major_iteration_frequency.
  optional RestartStrategy restart_strategy = 6 [default = ADAPTIVE_HEURISTIC];

  // This parameter controls exponential smoothing of log(primal_weight) when a
  // primal weight update occurs (i.e., when the ratio of primal and dual step
  // sizes is adjusted). At 0.0, the primal weight will be frozen at its initial
  // value and there will be no dynamic updates in the algorithm. At 1.0, there
  // is no smoothing in the updates. The default of 0.5 generally performs well,
  // but has been observed on occasion to trigger unstable swings in the primal
  // weight. We recommend also trying 0.0 (disabling primal weight updates), in
  // which case you must also tune initial_primal_weight.
  optional double primal_weight_update_smoothing = 7 [default = 0.5];

  // The initial value of the primal weight (i.e., the ratio of primal and dual
  // step sizes). The primal weight remains fixed throughout the solve if
  // primal_weight_update_smoothing = 0.0. If unset, the default is the ratio of
  // the norm of the objective vector to the L2 norm of the combined constraint
  // bounds vector (as defined above). If this ratio is not finite and positive,
  // then the default is 1.0 instead. For tuning, try powers of 10, for example,
  // from 10^{-6} to 10^6.
  optional double initial_primal_weight = 8;

  message PresolveOptions {
    // If true runs Glop's presolver on the given instance prior to solving.
    // Note that convergence criteria are still interpreted with respect to the
    // original problem. Certificates may not be available if presolve detects
    // infeasibility. Glop's presolver cannot apply to problems with quadratic
    // objectives or problems with more than 2^31 variables or constraints. It's
    // often beneficial to enable the presolver, especially on medium-sized
    // problems. At some larger scales, the presolver can become a serial
    // bottleneck.
    optional bool use_glop = 1;

    // Parameters to control glop's presolver. Only used when use_glop is true.
    // These are merged with and override PDLP's defaults.
    optional operations_research.glop.GlopParameters glop_parameters = 2;
  }
  optional PresolveOptions presolve_options = 16;

  // Number of L_infinity Ruiz rescaling iterations to apply to the constraint
  // matrix. Zero disables this rescaling pass. Recommended values to try when
  // tuning are 0, 5, and 10.
  optional int32 l_inf_ruiz_iterations = 9 [default = 5];

  // If true, applies L_2 norm rescaling after the Ruiz rescaling. Heuristically
  // this has been found to help convergence.
  optional bool l2_norm_rescaling = 10 [default = true];

  // For ADAPTIVE_HEURISTIC and ADAPTIVE_DISTANCE_BASED only: A relative
  // reduction in the potential function by this amount always triggers a
  // restart. Must be between 0.0 and 1.0.
  optional double sufficient_reduction_for_restart = 11 [default = 0.1];

  // For ADAPTIVE_HEURISTIC only: A relative reduction in the potential function
  // by this amount triggers a restart if, additionally, the quality of the
  // iterates appears to be getting worse. The value must be in the interval
  // [sufficient_reduction_for_restart, 1). Smaller values make restarts less
  // frequent, and larger values make them more frequent.
  optional double necessary_reduction_for_restart = 17 [default = 0.9];

  // Linesearch rule applied at each major iteration.
  optional LinesearchRule linesearch_rule = 12
      [default = ADAPTIVE_LINESEARCH_RULE];

  optional AdaptiveLinesearchParams adaptive_linesearch_parameters = 18;

  optional MalitskyPockParams malitsky_pock_parameters = 19;

  // Scaling factor applied to the initial step size (all step sizes if
  // linesearch_rule == CONSTANT_STEP_SIZE_RULE).
  optional double initial_step_size_scaling = 25 [default = 1.0];

  // Seeds for generating (pseudo-)random projections of iterates during
  // termination checks. For each seed, the projection of the primal and dual
  // solutions onto random planes in primal and dual space will be computed and
  // added the IterationStats if record_iteration_stats is true. The random
  // planes generated will be determined by the seeds, the primal and dual
  // dimensions, and num_threads.
  repeated int32 random_projection_seeds = 28 [packed = true];

  // Constraint bounds with absolute value at least this threshold are replaced
  // with infinities.
  // NOTE: This primarily affects the relative convergence criteria. A smaller
  // value makes the relative convergence criteria stronger. It also affects the
  // problem statistics LOG()ed at the start of the run, and the default initial
  // primal weight, since that is based on the norm of the bounds.
  optional double infinite_constraint_bound_threshold = 22 [default = inf];

  // See
  // https://developers.google.com/optimization/lp/pdlp_math#treating_some_variable_bounds_as_infinite
  // for a description of this flag.
  optional bool handle_some_primal_gradients_on_finite_bounds_as_residuals = 29
      [default = true];

  // When solving QPs with diagonal objective matrices, this option can be
  // turned on to enable an experimental solver that avoids linearization of the
  // quadratic term. The `diagonal_qp_solver_accuracy` parameter controls the
  // solve accuracy.
  // TODO(user): Turn this option on by default for quadratic
  // programs after numerical evaluation.
  optional bool use_diagonal_qp_trust_region_solver = 23 [default = false];

  // The solve tolerance of the experimental trust region solver for diagonal
  // QPs, controlling the accuracy of binary search over a one-dimensional
  // scaling parameter. Smaller values imply smaller relative error of the final
  // solution vector.
  // TODO(user): Find an expression for the final relative error.
  optional double diagonal_qp_trust_region_solver_tolerance = 24
      [default = 1.0e-8];

  // If true, periodically runs feasibility polishing, which attempts to move
  // from latest average iterate to one that is closer to feasibility (i.e., has
  // smaller primal and dual residuals) while probably increasing the objective
  // gap. This is useful primarily when the feasibility tolerances are fairly
  // tight and the objective gap tolerance is somewhat looser. Note that this
  // does not change the termination criteria, but rather can help achieve the
  // termination criteria more quickly when the objective gap is not as
  // important as feasibility.
  //
  // `use_feasibility_polishing` cannot be used with glop presolve, and requires
  // `handle_some_primal_gradients_on_finite_bounds_as_residuals == false`.
  // `use_feasibility_polishing` can only be used with linear programs.
  //
  // Feasibility polishing runs two separate phases, primal feasibility and dual
  // feasibility. The primal feasibility phase runs PDHG on the primal
  // feasibility problem (obtained by changing the objective vector to all
  // zeros), using the average primal iterate and zero dual (which is optimal
  // for the primal feasibility problem) as the initial solution. The dual
  // feasibility phase runs PDHG on the dual feasibility problem (obtained by
  // changing all finite variable and constraint bounds to zero), using the
  // average dual iterate and zero primal (which is optimal for the dual
  // feasibility problem) as the initial solution. The primal solution from the
  // primal feasibility phase and dual solution from the dual feasibility phase
  // are then combined (forming a solution of type
  // `POINT_TYPE_FEASIBILITY_POLISHING_SOLUTION`) and checked against the
  // termination criteria.
  //
  optional bool use_feasibility_polishing = 30 [default = false];

  reserved 13, 14, 15, 20, 21;
}